Sorry, no sales person is available right now to take your call. Pls leave a message and we will reply to you via email as soon as possible.
Ten-Layer 1–4 Order and Anylayer HDI Stackup Structures and Impedance Design Specifications
Ten-layer HDI is divided into five major categories based on microvia stacking structures: 1-order, 2-order, 3-order, 4-order, and Anylayer (ELIC, Every Layer Interconnect). The higher the order, the more layers of stacked blind vias and the higher the wiring density, making it better suited to terminal miniaturization and high-computing-power demands. Currently, consumer electronics, servers, and AI computing mainboards predominantly adopt 3-order, 4-order, and Anylayer ten-layer HDI.
1-order HDI: Only single blind vias between the surface layer and the secondary surface layer, with no stacked vias. The simplest process and lowest cost, suitable for low-to-mid-end smart terminals.
2-order HDI: Two rounds of laser blind vias, supporting stacked or staggered vias. Improved wiring density, commonly used in mid-range smartphones and industrial control mainboards.
3-order/4-order HDI: Multiple layers of stacked blind vias, fine lines and small holes, high-density wiring. Standard configuration for flagship smartphones, tablets, and automotive computing boards.
Anylayer (ELIC, any-order): Every Layer Interconnect—laser blind vias can be drilled between any two layers, with no traditional core board restriction. Enables ultimate thinness and miniaturization; core board material for high-end foldable screens and high-end AI modules.
Unified process note: The overall lamination, laser drilling, and impedance control processes for KINJI's ten-layer HDI are fully interchangeable with the eight-layer full-order HDI system. Stackup design rules, impedance calculation baselines, and material selection standards can directly reference the technical document "Eight-Layer HDI (1-Order, 2-Order, 3-Order, Any-Order) Stackup and Impedance."


Considering the stackup and process characteristics of ten-layer HDI at each order, in the current consumer electronics terminal sector, 10-layer and 12-layer Anylayer (any-order) HDI have already become the mainstream specification for high-end terminals. Compared with conventional 1–4 order HDI, Anylayer any-order interconnect technology, with its core advantages of ultra-high wiring density, ultimate thinness and lightweight structure, and flexible interlayer interconnection, is widely used in high-end smartphones, smart wearables, AI terminals, and other precision electronic products.
Apple was the world's first brand to commercially deploy Anylayer HDI mainboards at scale. Since the iPhone 4S, which was the first to carry a 10-layer 5-order Anylayer HDI mainboard (5-round laser drilling process), this high-end HDI technology has rapidly gained popularity. Huawei, OPPO, Xiaomi, and other major domestic smartphone manufacturers have followed suit, applying Anylayer HDI technology to flagship model mainboard designs, comprehensively improving terminal integration and performance.
Looking at the technological evolution of Apple's smartphone mainboards, it has gone through four core development stages, leading the industry's PCB process upgrade direction: The first stage was traditional ordinary multilayer PCBs, with mature processes and relatively low wiring density; the second stage was 1–3 order conventional HDI boards, with mainstream layer counts of 8–12, greatly improving circuit integration; the third stage, marked by the iPhone 4S, introduced 5-order 10-layer Anylayer any-order interconnect HDI technology for the first time, breaking through the wiring limitations of conventional-order HDI; the fourth stage, with the iPhone X as the technological turning point, innovatively introduced SLP (Substrate-Like PCB) technology, and since 2020, all Apple shipping models have been fully equipped with SLP substrates, completing the upgrade from high-end HDI to substrate-like boards.
In terms of production processes and costs, the process difficulty and manufacturing cost of HDI mainboards are highly correlated with blind via order, showing a positive incremental pattern. Each increase in HDI blind via order places more stringent requirements on laser drilling, lamination and planarization, and impedance control, with process complexity and processing difficulty rising in tandem, and overall manufacturing costs increasing accordingly. Ten-layer Anylayer any-order HDI breaks through the interlayer interconnection limitations of conventional 1–4 order HDI, requiring multiple precise laser drilling rounds and full-layer refined impedance simulation and control, so its process cost is far higher than that of conventional multi-order HDI products, placing it within the high-end precision PCB manufacturing category.

Currently, mainstream high-end HDI circuit boards are produced using the subtractive process for ELIC full-layer interconnect (Anylayer any-order) boards. As terminal product integration continues to upgrade, high-end Anylayer HDI places higher demands on circuit fabrication, with line width/space specifications needing to shrink from 50 μm to the 30 μm range; traditional any-order subtractive electroplating processes can no longer meet ultra-fine line processing requirements, and a switch to semi-additive process (SAP) is required for mass production. SAP is originally a mature mass-production process for IC substrates; HDI boards made with this process, with performance approaching substrate standards, are uniformly named SLP (Substrate-Like PCB) in the industry.
The figure below shows KINJI 's conventional ten-layer Any Layer (any-order) HDI stackup structure and impedance information:

